Ceramic Marble: Care & Material Guide
Our ceramic marble collection brings the timeless beauty of natural stone into your home with the practical benefits of a fired ceramic surface. This guide covers what to expect from the material, how to look after it, and how it compares to natural marble.
Ceramic Marble vs. Natural Stone
Ceramic marble tiles and surfaces are manufactured from kiln-fired clay with a high-resolution printed finish that replicates the veining and texture of natural marble. Unlike natural stone, ceramic marble is non-porous, which means it does not require sealing and is generally more resistant to staining from everyday spills. Natural marble is a quarried stone and is inherently porous; it can etch when it comes into contact with acidic substances such as lemon juice, vinegar, or some cleaning products, and it requires periodic sealing to maintain its finish. Ceramic marble does not etch in the same way, though its surface glaze can be scratched or dulled over time if abrasive products are used.
Each piece of natural stone has unique veining shaped by geology over millions of years. Ceramic marble faithfully reproduces marble aesthetics, but individual tiles may show slight tonal or pattern variation — this is a normal characteristic of the product, not a defect.
Recommended Cleaning
For routine cleaning, use a pH-neutral cleaner or warm water with a small amount of washing-up liquid and a soft cloth or mop. Avoid abrasive scourers, steel wool, or powdered cleaners, as these can scratch or dull the surface glaze. Bleach-based or strongly acidic products (e.g. those containing hydrochloric acid) are not suitable for ceramic marble and may damage the finish or grout over time.
Spills — Clean Up Promptly
Although ceramic marble is non-porous, prolonged contact with liquids — particularly oils, wine, coffee, or coloured drinks — can leave residue on the surface or seep into grout lines. Wipe spills promptly with a clean, damp cloth rather than allowing them to sit. For grout areas, a soft-bristled brush with a mild cleaning solution helps remove build-up without causing damage.
Avoiding Prolonged Liquid Contact
Standing water around taps, sinks, or in shower areas should be wiped dry where practical to prevent mineral deposits (limescale) from forming. In hard-water areas, a dedicated limescale remover suitable for ceramic surfaces can be used periodically, following the product instructions carefully.
Using Coasters & Trivets
We recommend using coasters under glasses and mugs and trivets or heat-resistant mats under hot cookware on ceramic marble worktops and dining surfaces. While ceramic is more heat-tolerant than many engineered surfaces, direct or prolonged heat exposure may stress the glaze or cause thermal shock in some circumstances. Coasters also help protect the surface from scratching caused by the bases of ceramic, metal, or stone objects.
Natural Variation to Expect
Ceramic marble products are designed to replicate the look of natural stone, and some degree of shade, pattern, and surface texture variation between tiles or pieces is to be expected. We recommend laying out tiles before fixing to check for any tonal differences and to arrange them in a way that suits your preference. This natural variation is a characteristic of the product range, not an indication of a fault.
For information about delivery, returns, or our ordering process, please visit our Delivery & Returns page. For answers to common questions, see our FAQs.
